To ensure comfort, safety, and performance, the pedals must be chosen carefully. Today, flat pedals have almost disappeared from the road cycling landscape where automatic pedals are preferred. Not only do they transmit all your power to the crankset, but they are also much less dangerous to the joints in the event of a fall since the mechanism unlocks if the forces become too great.
Buying The Right Bicycle Pedals
Now you already know which types of pedals are available and for which type of driver with which driving style they are particularly suitable. But of course, there are many more parameters that you should consider before buying the pedal. Our bike pedal test tells you everything about material, grip, weight, and Co.
- The material: As already partially mentioned in our table, most bicycle pedals are made of aluminum, plastic or steel. In the vast majority of cases, not only one material is used, but a mixture of two or even all three. With regard to the advantages and disadvantages, one must pay attention to the design of the respective pedals. Depending on this, aluminum and steel are more suitable as dominant materials. Therefore, most pedals are also black or silver. Different plastics are then additionally used as supporting material.
- The grip: When talking about bicycle pedals, you often hear the term “grip”. But what exactly is meant by that? Grip basically refers to the tread and its slip resistance. It is important that the rider does not just slip off the tread, even in the rain with his sneakers. Instead, bike pedals should provide sufficient support here. Especially with block pedals, hard rubber is responsible as material, with the claw pedals it is about the eponymous claws. Especially for mountain bikers, we can recommend in our bicycle pedals test pedals with good grip.
- The weight: It is important to know that manufacturers always quote the weight of bicycle pedals in pairs. This is how it works in our bike pedal test. In most cases, the weight is between 300 and 500 grams. Depending on whether you make the streets of your city unsafe with a mountain bike, road bike or city bike, the weight plays a different role. Basically, a lower weight but an advantage, since the start works easier and you come faster from the spot. Especially if you drive with a city bike with a child trailer, you should pay attention to the low weight of the wheel components. And thus of course also with the bicycle pedals.
- The reflectors: According to road traffic regulations some equipment must be attached to each bike, which is traveling on the roads. These include, among many other things, two fixed and non-slip pedals, which are equipped both front and rear with two yellow reflectors. As our bicycle pedals comparison shows, unfortunately not all bicycle pedals in the test are directly equipped with such reflectors. Here you have to retrofit on your own if you want to cycle on roads.
List of Best Bicycle Pedals in 2025
Table of Contents
- List of Best Bicycle Pedals in 2025
- Conclusion
- Top 10 Best Reclining Shower Chairs in 2025 Reviews | Buyer's Guide
- Top 10 Best Toasters in 2025 Reviews | Buyer's Guide
- Top 10 Best Standing Desk Chairs in 2025 Reviews | Buyer's Guide
- Top 10 Best Collapsible Wagons in 2025 Reviews | Buyer's Guide
- Top 10 Best Heated Pants in 2025 Reviews | Buyer’s Guide
- Top 10 Best Kitesurfings in 2025 Reviews | Buyer's Guide
#10. Imrider Lightweight Polyamide Bike Pedals
With a non-slip surface, these comfortable pedals allow you to ride a bike safely. Weighing only 248 g, these two pedals are composed of a plastic body and a steel axle. They are equipped with non-slip rubber for good foot support. Equipped with reflectors, they make the child’s bike visible even in low light.
The support surfaces are black plastic and offer good grip through their rough surfaces. The foot does not slip on the pedal in case of intense effort, or if it is wet. The structure of the pedal is made of steel.
Reflectors on the front and back of the pedal allow the cyclist to be seen from the front or back, regardless of the brightness. The pitch of these pedals is 9/16 “These pedals are sold in pairs.
- Imrider pedals are very affordable.
- The pedal shaft of stainless steel is maintenance-free.
- The wide surface of the pedal ensures good force and pressure distribution.
- The material of the pedal is somewhat less hard and therefore damages faster at impact.
- In relation to other pedals, the Imrider pedal is quite pricey.
#9. Mzyrh Mountain Bike Pedals
These bike pedals provide good foothold and a large support surface. the dimensions of the pedals are 107 cm (length) x 95 cm (width) x 34 mm (height). The black rubber anti-slip coating allows the foot to stay in place on the pedal, even in rainy weather. This kind of pedals is most often mounted on city bikes. The pair of pedal weighs 412 g.
The axes of these pedals are in boron. They are 9/16 ” axles, equipped with rolling cones that allow the pedal to turn smoothly and offer no unnecessary or minimal resistance so that cyclists who use these pedals can be comfortable. seen, even in low light, they are equipped with reflex reflectors on both sides. Their classic style suits both girls and boys. These are pedals adapted to all types of paths and particularly suitable for daily school trips.
These pedals for children are made of a lightweight plastic body and a non-slip rubber layer on each side to ensure the good support of the feet of the young cyclist. The pedals have 3 reflectors on each side to provide better safety and visibility when lighting is not optimal. The replacement reflectors are optional.
- The extra light spring in the pedal makes it easier to click in and out.
- Ideal for beginners.
- The tension of the spring can be adjusted with a small socket. This way you can tighten your pedals if you start to feel more secure.
- The bearings are of a lesser quality than the more expensive pedals, but that is also the price.
- Relatively heavy.
#8. Bonmixc Mountain Bike Pedals
These steel pedals are particularly suitable for mountain biking and mountain biking but they can also be used in cycling and on a bike for everyday use in the city. Flat, they still have a slight relief allowing all types of shoes to hang well. The body of the pedal is plastic and the cage is steel. Sold in pairs with integrated reflectors for more visibility. It is also possible to install footpads.
These pedals have an original design that allows you to customize your bike discreetly and easily. Measuring 99mm long and 68mm wide, the City Touring pair of pedals weighs 480g. The body of the pedal is made of aluminum. The cage is made of resin and has reliefs. It is slightly rough to maintain the foot and prevent the cyclist from slipping.
For an original look and more visibility, they are equipped with front and rear reflectors. Almost universal, they are equipped with 9/16 threads, perfect for city bikes and cyclists.
- Good price-quality ratio
- You can determine how easily you can click in and out by adjusting the spring tension.
- The steel insert plate on top of the pedal ensures that the pedal does not slip through clicking. The result is a longer lifespan.
- Relatively heavy
- Composite damages faster in a crash
#7. MEETLOCKS Bike Pedal
Ideal for the city, this pair of MEETLOCKS Bike Pedals offer great pedaling comfort. With a non-slip surface, they allow a good support of the foot while avoiding damaging the shoes by walking under the pedal to start.
With large dimensions of 110.3 x 95.1 x 28.9 mm, these 9/16 “axle pedals offer good foot stability with a large surface area and anti-slip coating for the rider’s comfort. an aluminum and kraton body, a sturdy chromoly steel shaft, and a ball bearing, these silver-colored pedals have 2 side reflectors providing better visibility, with a total weight of 542 g.
They are made of polypropylene which gives them strength and resistance. The fixing pin is 9/16 ” with a length of 7 mm to fit the virtually most child and adult bikes. Reflectors are arranged on the front and back for better visibility of the bike. For good support of the feet on the pedals, you can add straps. These foot straps are available as an option at an attractive price.
- This pedal has a sporty design.
- The surface for cycling with regular shoes is even larger than with ‘normal’ pedals.
- The spring tension of the click mechanism is easy to set up and can, therefore, be adjusted exactly to your personal wishes.
- Relatively heavy
- Composite damages faster in a crash
#6. RockBros Bike Bicycle Pedals
These bike pedals have an aluminum structure, a Cr-Mo shaft, and a plastic body. They fold and unfold easily with a hand. When unfolded, it is impossible to fold them without operating the system by hand which guarantees you a safe pedaling. The reflectors on both sides of the pedal can be seen even when it is dark and pedaling can be done on both sides of the pedal.
With only 400g, these foldable pedals are ideal for folding bikes and for those who wish to store their bike in tight places. The dimensions of the pedals are 9.5 cm in length for the platform -12.2 cm with thread x 7.6 cm wide x 3.3 cm thick. Pedal installation requires a 15 mm open-end wrench available in the bike tool case.
The design of the pedals is specially adapted to suit long bike journeys: a shortly curved shape to limit the points of tension in the foot and also to avoid numbness as much as possible. In order to preserve the pedaling force as much as possible, the pedals adapt perfectly to the sole.
On the inside of the pedal, there are edges that ensure that the foot of the cyclist is always in a good position and avoids contact with the pedal. The pedals are made with a very short axis that aligns the foot-knee-hip joints as much as possible. And on both sides, there is an ergonomic surface.
- Super light and the choice of many professional cyclists.
- Not two, but three bearings per pedal. Runs extra smoothly and lasts a long time.
- You can determine how easily you can click in and out by adjusting the spring tension.
- The carbon body damages a bit faster at impact.
- The price, but of course you get something in return.
#5. RaceFace Chester Mountain Bike Pedal
These pedals ensure good foot support on the bikes. Their body is made of polycarbonate which gives a great resistance and a great comfort to this model of pedals. With their orange color in full transparency, they will give an original style and a colorful touch to your bike.
These classic pedals are specially designed for mountain biking and mountain biking. Composed of anodized aluminum, they are rustproof and very strong. They can be used on a bicycle touring bike or on a bike in the city. Small notches in the cage of the pedal allow your shoes to hang well.
The body is made of a plastic material. The pedals are strong and have dimensions of 135×93 mm. They weigh 420 grams have a non-slip surface with a diamond profile. To ensure better visibility of the bike and thus optimize the safety of the cyclist, this pair of pedals comes with reflectors.
- Robust and robust pedal that has proven its reputation over the years.
- Adjustable spring tension means that you can set yourself how easy you can click in and out.
- Larger surface than its predecessor for even more stability.
- Unfortunately only available in one color. Black always fits with your bike.
- The carbon body damages a bit faster at impact.
#4. Speedplay Zero
These bike pedals are non-slip and provide great pedaling comfort. They are composed of a sandpaper surface. This is a grip similar to the grip that can be found on skateboards and that promotes grip.
These black pedals have a 9/16 “thread and are ideal for city and VTC bikes. The platform pedals measure 10 x 8.5 cm for 2 cm thick. For greater comfort, you can also strengthen the maintenance of your feet by installing velcro straps on your pedals
In order to easily dismount your old pedals, we offer the pedal key. If you want to equip an electric bike with this type of pedals, we offer pedals for an electric bike with the anti-slip coating. Also, find LED pedals that improve your visibility.
- Can be used with spd mountain bike plates. You can use your shoes with the profile on your racing or be touring bike.
- Gives more support than a regular mountain bike pedal. That is more pleasant on longer distances.
- Spring tension is very precise. This way you can decide for yourself how easily you click and unzip.
- Unfortunately only available in one color. Black always fits with your bike.
- The carbon body damages a bit faster at impact.
#3. Time Xpresso 15
The pedals are, because of their wide and flat shape, specially dedicated to the practice of the bike. Their shape ensures great stability to which is added great robustness. It is possible to add a pair of straps to your pedals for more support to the feet. These are offered as an option at a preferential rate. The body of the pedal is made of polycarbonate, which gives it the advantage of being very resistant to shocks.
With a length of 10 cm and a width of 8.2 cm, the bike pedals model VP Safety benefit from a wide platform for good support of the foot during pedaling. Lightweight, they weigh only 370 grams both pedals together, a weight of 185 each. The pedals are sold in pairs. Black, the pedals are made of resin and have a thread of 9/16.
For added safety, the pedals have reflectors and LEDs. Each pedal has 6 flashing LEDs: two on each side and two on the front of the pedal. You can pedal in low light or bad weather while remaining visible to other road users. The leads engage as soon as you start pedaling. They are specially designed for leisure use in the city on all types of bike.
- Gives more support than a regular mountain bike pedal. That is more pleasant on longer distances.
- Snap-in from four sides. Not coming into your pedal is simply no longer.
- Because of the large openings, there is no mud hanging in the pedal.
- Lightweight.
- Maintenance-sensitive pedals.
- The body has a tendency to eat in carbon soles. Therefore, use Shoe Shields to prevent this.
#2. Look Keo 2 Max Blade 12
For trekking or walking around town, these comfortable unisex pedals, silver and black, are particularly suitable for city bikes.
The Look Keo 2 Max Blade 12 bike pedals are designed to enhance and provide great pedaling comfort. They hold the effectiveness of their non-skid pads installed on each side of the pedal and which ensure a perfect adherence of the feet. The pedals have a polished aluminum shaft and a plastic body. The bearing of the pedals is ensured by a ball system, maintained by quality and resistant CrMo steel axle for good stability and a regular practice of the bike.
These pedals measure 100 x 80 mm and weigh 335 g. They are sold in pairs. Reflex reflectors are present to ensure good cycling signage. Thanks to their large size, they make it possible to keep good support of the feet on the pedals. Transparent red, they also offer a unique style to the bike.
The pedals, sold in pairs, are made of a polycarbonate body with a CrMo axis of 9/16. To be even more stable, it is possible to add straps. Red in color, they will give a unique look to your bike. These pedals also exist in other colors.
- The extra light spring in the pedal makes it easier to click in and out.
- Ideal for beginners.
- The tension of the spring can be adjusted with a small socket. This way you can tighten your pedals if you start to feel more secure.
- The bearings are of a lesser quality than the more expensive pedals, but that is also the price.
- Relatively heavy.
#1. Shimano PD-M520
This pair of pedals, due to the great stability it provides and its robustness is intended for installation on an electric bike. It is also very suitable for urban cyclists, cyclists or simple bike riders wishing to gain stability. They are designed in aluminum with a Chromoly steel axle giving them a useful resistance to intensive use. Black and silver, they have a flattened shape with a sporty profile. These pedals look elegant on each side of 10 interchangeable pins offering better grip. The pins are assembled and disassembled using the same wrench which also serves for disassembling the pedals.
Black and silver, these pedals have an ultra-flat shape that offers better power transfer by reducing energy loss. This design also guarantees a high level of comfort and good pedaling sensations. The Shimano PD-M520 bike pedals are water resistant and can be used regardless of terrain and conditions. Thanks to the presence of interchangeable pins, they provide excellent grip for more efficient pedaling.
With an aluminum body and cage, these 12mm thick flat pedals weigh only 350 grams. They have the dimension: 99.5 x 96 mm. The pedals feature cartridge bearing, a convenient device that keeps the bearings from dust and grime. The bearings require no maintenance or adjustment to be mounted. The axes of the pedals are Chromoly steel. A robust material that guarantees excellent resistance for maximum durability and uses in the toughest conditions.
- Can be used with mountain bike plates. You can use your shoes with a profile on your racing or be touring bike.
- Gives more support than a regular mountain bike pedal. That is more pleasant on longer distances.
- Spring tension is very precise. This way you can decide for yourself how easily you click and unzip.
- The material of the pedal is somewhat less hard and therefore damages faster at impact.
- The body has a tendency to eat in carbon soles. Therefore, use Shoe Shields to prevent this.
Conclusion
The pedals for a bicycle are apparently identical but differ in their threading. The right pedal (which mounts on the crankset side and is identified with the letter R) has a right thread, i.e. it is screwed by turning it clockwise while the left pedal (indicated with the letter R) is left-handed, i.e. it is screwed by turning it counterclockwise. This is to ensure that they do not come loose during operation, but are kept tight by their use.
Leave a Reply